Precision wire products engineered for demanding manufacturers
Ø1.00–14.00 mm precision cold-drawn wire in SAE 1006/1008/1010 low-carbon grades, produced to TS EN 10218. Bright, super-bright or black finish; custom tensile 500–1050 N/mm².
Typical uses: fasteners & screws, springs, welding wire, weld mesh, appliance and furniture components.
Ø1.00–12.00 mm full-annealed or inter-annealed wire with a soft black or bright, coating-ready surface. Custom tensile properties on request.
Typical uses: tying & binding, deep-draw forming, general fabrication, galvanising feedstock.
Ø1.00–10.00 mm, cut to length 70 mm – 3,000 mm at your tolerance. Straightened and de-burred; supplied in pallet bundles or wooden/plastic crates.
Typical uses: handles, shafts, pins, grill bars, agricultural and furniture parts.
Flat bar wire in custom widths and thicknesses, plus condenser (bundy-tube grade) wire Ø1.20–4.00 mm with a smooth, coat-ready surface — powder-paint and electro-galvanising suitable.
Typical uses: refrigeration & cooling tubing, profiles, brackets, decorative and structural flats.
/ technical data /
Specifications at a glance
| Product | Diameter | Grades / standard | Finish | Tensile | Packaging |
|---|---|---|---|---|---|
| Cold-Drawn Wire | Ø1.00–14.00 mm | SAE 1006/1008/1010 · TS EN 10218 | Bright · super-bright · black | 500–1050 N/mm² | Baskets, bobbins, rozet, spools (20–2,000 kg) |
| Annealed Wire | Ø1.00–12.00 mm | DIN EN 10016 · TS 2348 | Soft black · bright, coating-ready | On request | Baskets, bobbins, coils |
| Cut-to-Length Wire | Ø1.00–10.00 mm | To customer drawing | Straightened · de-burred | On request | Pallet bundles, crates (70–3,000 mm) |
| Flat Bar Wire | Custom W × T | To customer profile | Bright · coat-ready | On request | Coils, bundles |
| Condenser Wire | Ø1.20–4.00 mm | Bundy-tube grade | Smooth · coat-ready | On request | Bobbins, spools |
All production is heat- and lot-traceable. EN 10204 3.1 inspection certificates supplied on request. Lead time typically 2–4 weeks from PO confirmation.
Industries we serve
/ five-step quality flow /
How every OSSO Wire coil earns its 3.1 certificate
Wire-rod incoming inspection
Every rod coil is checked against mill certificate — hardness, chemistry, surface. Rejected if it fails.
Controlled cold drawing
Tungsten-carbide dies inspected and rotated on schedule. Tensile monitored in-process, not only at final.
Protective-atmosphere annealing
Furnace campaigns planned to hit your tensile and elongation targets. Surface stays coating-ready.
Final inspection & test
Tensile, diameter, surface, and packaging integrity verified on every finished coil before dispatch.
EN 10204 3.1 documentation
Independent inspection certificate ties chemistry, mechanical data and lot number to the coil you receive.
Heat & lot traceability
Every tag carries heat, cast, lot and production date. Retrievable years later if a warranty question arises.
/ compare our five wire families /
Which product fits your process?
Cold-Drawn Wire — technical facts
- Diameter
- Ø1.00 – 14.00 mm
- Grades
- SAE 1006 / 1008 / 1010
- Standard
- TS EN 10218
- Finish
- Bright · super-bright · black
- Tensile
- 500 – 1050 N/mm²
- Packaging
- Baskets · bobbins · rozet · spools (20 – 2,000 kg)
Typical uses
- Fasteners & screws (cold-heading, roll-forming)
- Springs (helical, torsion, extension)
- Welding wire & welded mesh
- White-goods components (oven grills, racks, baskets)
- Automotive tier-2 fastener stock
- Construction mesh & hardware
Annealed Wire — technical facts
- Diameter
- Ø1.00 – 12.00 mm
- Standard
- DIN EN 10016 · TS 2348
- Cycle
- Full-anneal · inter-anneal
- Finish
- Soft black · bright coating-ready
- Tensile
- To customer target
- Packaging
- Baskets · bobbins · coils
Typical uses
- Tying & binding wire (construction, agriculture)
- Deep-draw forming
- General fabrication
- Hot-dip galvanising feedstock
- Paint / plating pre-treatment stock
Cut-to-Length Wire — technical facts
- Diameter
- Ø1.00 – 10.00 mm
- Length
- 70 – 3,000 mm
- Tolerance
- To customer drawing (±0.5 mm typical)
- Finish
- Straightened · de-burred
- Ends
- Square · chamfered on request
- Packaging
- Pallet bundles · wooden/plastic crates
Typical uses
- Handles, shafts, pins
- Grill bars & oven racks
- Furniture & agricultural parts
- Welding-electrode stock
- Feed-stock for automated forming lines
Flat Bar Wire — technical facts
- Section
- Custom width × thickness
- Grades
- Low-carbon (SAE 1006/1008)
- Finish
- Bright · coat-ready
- Edges
- Square · radius on request
- Tensile
- To customer target
- Packaging
- Coils · bundles
Typical uses
- Construction brackets & profiles
- Decorative flat sections
- Structural fasteners
- Furniture profiles
- Custom form-tooling feedstock
Condenser Wire — technical facts
- Diameter
- Ø1.20 – 4.00 mm
- Grade
- Bundy-tube quality
- Finish
- Smooth · coat-ready
- Downstream
- Powder paint · electro-galvanising
- Tensile
- To customer target
- Packaging
- Bobbins · spools
Typical uses
- Refrigeration condenser tubing
- Cold-chain heat exchangers
- Freezer coil assemblies
- HVAC & cooling components
/ interactive planner /
Spec calculator
Pick your product family and specs to see indicative lead time and packaging — then email the built request to our quote desk.
Indicative only. Real quote returned within one business day.
/ raw material vs finished coil /
See the transformation — wire rod to precision drawn wire
Drag the divider left or right. Every OSSO coil starts as EAF-produced wire rod (DIN EN 10016) and is cold-drawn to your spec with continuous laser diameter monitoring and in-process tensile checks.
Why OSSO Wire — five things you can count on
Get pricing and lead time within one business day
Send us your specifications — diameter, steel grade, finish, packaging — and our team will come back with pricing, lead time, and a technical data sheet by the next working day.
Call us today
+90 236 214 00 66
Consistent production, inspection and delivery
Our production flow — from raw-material intake to shipped coil
Get a real quote in one working day
Leave your email and a brief spec — our technical desk will come back with pricing, lead time and EN 10204 3.1 documentation notes.
Or email info@ossowire.com · +90 236 214 00 66
/ downloads · v2026 /
Spec sheets, certificates & catalogue.
Everything your quality, purchasing, and R&D teams need to evaluate OSSO Wire — in one click, no gate.
OSSO Wire Catalogue 2026
Full product range: cold-drawn, annealed, cut-to-length, flat bar and condenser wire. Diameter ranges, grades, mechanical properties, packaging.
ISO Certificates
Quality Management (ISO 9001:2015), Environmental Management (ISO 14001:2015), and Occupational Health & Safety (ISO 45001:2018).
Sample Mill Certificate
A redacted sample of the EN 10204 3.1 certificate that ships with every batch. Chemistry, mechanicals, dimensional inspection, heat traceability.