This year marks twenty-one years. The plant is a 7,000 m² wire manufacturing facility in the Muradiye Organized Industrial Zone (Muradiye OSB), Manisa. Under one roof we run wire rod receiving, cold drawing, annealing, cut-to-length, flat-bar profiling, and packaging. That single-site…
Tensile scatter within a coil — the number that matters most
Tensile scatter within a single coil is the technical variable that most affects downstream customers. A coil where every metre reads within a narrow tensile band lets a header or a bender run without adjustments; a coil with wide scatter forces…
A condenser wire customer expands their cold-chain business
Cold-chain refrigeration continues to grow as an end-sector for our condenser (bundy-tube grade) wire. A customer in the cold-chain space expanded their line and needed a step-up in supply. We qualified additional inspection points on the coil surface and adjusted our…
Where AI actually helps a wire plant in 2025
In 2025 the AI conversation is finally past the “let’s ban ChatGPT on the shop floor” phase and into “what does this actually help us do.” For a wire plant, three areas are real: predictive maintenance on drawing benches, vision-based surface…
EN 10204 3.1 inspection certificates — why we default to them in 2025
EN 10204 3.1 is a “specific inspection document” — validated by our inspection department, independent of the production line — that certifies the material meets ordered specification and gives real test results from the actual heat. In 2025 it is treated…
Automotive sub-supply: cold-drawn wire for fasteners
Automotive fasteners rely on cold-drawn low-carbon wire that behaves predictably during header and roll-forming. In 2025 we saw more customers ask for narrower tensile scatter within a single coil, not just batch to batch. To hold that, wire-rod incoming quality control…
Cold-drawn Ø1.00 – Ø14.00 mm — our workhorse family
Cold-drawn wire remains the backbone of what leaves our Muradiye OSB plant in 2025. We draw Ø1.00 to Ø14.00 mm from low-carbon SAE 1006/1008/1010 wire rod, in bright or super-bright finish. Tensile strength typically lands between 500 and 1050 N/mm² depending…
Looking back on 2024 — production, customers, and what changed
2024 brought steady demand across our end sectors and continued expectation on documentation quality. Green steel, EPD (environmental product declaration) and scope 3 emissions are entering every RFQ from EU buyers. We start measuring what we can, honestly. We exported to…
TS EN 10218 — the low-carbon wire family standard we work to
TS EN 10218 covers general requirements for steel wire — low-carbon and higher-carbon grades. It sets tolerances on diameter, tensile, surface, and packaging that we use as the reference for most of our production. In 2024 we treat 10218 as the…
Export destinations — where our wire is going in 2024
In 2024 our export mix is: EU, MENA, Africa, Americas. Different destinations have different documentation expectations. Every export shipment travels with an EN 10204 3.1 inspection certificate and a commercial pack that includes packing list, invoice, and country-of-origin documentation on request….